CTEC CFP Alarmsense Conventional 8 zone panel Two Wire CFP708-2

CTEC CFP Alarmsense Conventional 8 zone panel Two Wire CFP708-2

Brand: CTEC
Product Code: CFP708-2
Availability: 3-5 Days

£278.92 Inc VAT £232.43 Ex VAT

Qty

0 reviews / Write a review

CTEC CFP AlarmSense Conventional 8 zone panel (Two Wire)

CFP Alarmsense 8 zone, two-wire fire panel.

The CFP708-2 includes four AlarmSense zones, four conventional sounder circuits, class change & alert inputs and onboard fire & fault relays.

A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities.

Includes 8 AlarmSense zone circuits.

Note: requires 2 x 3.4Ah lead acid batteries.

For use only with Apollo AlarmSense two-wire detectors, call points and sounders.

Approvals/certifications    Certified to EN54-2/4 by the LPCB (0832-CPR-F0386).
Mains supply                                           230V 50/60Hz.
Mains rated current       350mA maximum.
Internal power supply       19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to    1.5A @ 230Vac (ImaxA eq 146mA).
Quiescent current       25mA (mains failed, internal sounder active, PSU & gen fault LED lit).
Max battery size and type 2 x 12V 3.2Ah VRLA connected in series. Min. battery size 1.2Ah.
No. of detector zone circuits               The CFP708-2 has 8 AlarmSense zone circuits which are compatible with Apollo's AlarmSense range of detectors & call points AND sounders & visual indicators.
Call point resistor value       Only use AlarmSense call points.
Max. devices per detector zone    25 AlarmSense detectors/manual call points per AlarmSense zone.
No. of conventional sounder circuits     4 - these are additional conventional (non-AlarmSense) sounder circuits; Max. length per circuit is 500m.
EOL resistor value                                     6800Ω 5% Tol. 0/25W (blue, grey, red, gold).
Alarm voltage                                             27V max, 20V min (final battery voltage)
Max. sounder output current    Each AlarmSense zone circuit & sounder circuit will support a max. sounder current of 200mA. Total sounder loading per panel should not exceed 1.25A.
Expansion connections                          Yes – for optional network driver cards (one required per repeater system), relay output cards and EN54-13 sounder circuit interface boards.
Product dimensions (mm)                     380 W x 235 H x D 96mm.
Construction & finish                              Plastic lid and base; RAL7035 textured
IP Rating                                                      IP30
Weight 1.75kg (without batteries).